Quick answer
Start by connecting the EZQuest USB-C Multimedia Hub directly to a USB-C, USB4, or Thunderbolt port on your computer.
Start by connecting the EZQuest USB-C Multimedia Hub directly to a USB-C, USB4, or Thunderbolt port on your computer. For the most reliable setup, avoid stacking adapters during the first connection. Once the hub is recognized, connect one accessory at a time so it is easy to confirm each part of the desk is working.
If you are using an external display, connect the monitor to the hub, turn the monitor on, and select the correct input on the display. Open your computer display settings to choose mirror or extended desktop mode. For higher resolutions or dual display setups, confirm that your computer and operating system support the display mode you are trying to use.
For charging, connect your USB-C power adapter to the hub's Power Delivery port when available. The hub will reserve some power for connected devices, so use a charger rated appropriately for your laptop. If charging seems slow, test with the original power adapter and a known high-quality USB-C cable.
USB accessories such as keyboards, mice, flash drives, card readers, and storage devices can be connected after power and display are stable. Large file transfers may perform best when storage is connected directly to the fastest available port on the hub.
If something is not working, disconnect the hub, restart the computer, reconnect power first, then reconnect the hub and accessories. Also check for operating system updates and confirm the accessory is supported by your device. A careful first setup usually resolves the most common connection issues.
